Construction, Building and Civil Engineering
When renovating and maintaining structures, buildings, monuments and facades, it is not uncommon to be faced with the challenge of having to remove damaged concrete in order to re-shutter these areas in the further course of the work and then pour new concrete. With water jet systems, concrete can be removed layer by layer up to the complete exposure of the reinforcement. Systems can be combined and adjusted in such a way that different water jet strengths are possible and a correspondingly large or small amount of material can be removed at once. A spot-jet nozzle or a MASTERJET rotor jet can be used for this purpose. High-pressure systems and application systems from Hammelmann form a complete package for cost-effective operation.
Restoration and maintenance with hydrodemolition
Gentle, pinpoint exposure of the reinforcement up to the breakthrough of the surface
Gentle exposure of iron or steel reinforcements as well as structural steel meshes is a major advantage when processing concrete with modern water jet systems. In this process, only the damaged concrete is removed until the reinforcement is partially or completely exposed. The steel remains completely undamaged after exposure and the surface to be processed is optimally prepared for further work steps. Water jetting also enables precise work on specific areas of a concrete surface. This enables precise exposure and even complete breakthroughs in the wall.
Application examples from practice
- Layer by layer removal of various concrete layers
- Gentle, precise exposure of the reinforcement up to the breakthrough of the surface
- Renovation of wind turbines / Spot removal of damaged concrete
- Remove contamination from a wide variety of components quickly and predictably
Roughening a wide variety of surfaces - from fine to rough
A high-pressure spray gun can be excellently used in combination with a MASTERJET rotor jet for roughening different concrete surfaces. Equip your nozzle with 2, 3, 4 or 6 inserts and decide for yourself the degree of roughening. The water pressure is distributed evenly over the number of nozzles fitted. With 6 nozzle inserts, you therefore exert significantly less pressure on the surface to be processed than with 2 nozzle inserts. According to this rule, you can decide for yourself whether you want to roughen the surface more finely or coarsely.
Application examples from practice
- Roughening concrete surfaces - from fine to coarse
- Roughening of roads and roadways
- Decoating of tunnel and interior walls
- Derusting and decoating of surfaces and substrates and protecting them from corrosion
High performance in the construction industry
High-pressure spray guns
Configure your high pressure spray gun for your daily challenges. Available in mechanical, electrical and bypass versions and a variaty of accessories.
Efficient concrete preparation with safety and ergonomics
When working with concrete, the focus is on the safety and ergonomics of the user. From cleaning to exposure, at Hammelmann you have many options available.
Mobile AQUAJET® diesel units
AQUAJET® diesel units are available as road-going or stationary units, as basic units or in a container - individual built for all your requirements.
AQUABLAST® Cleaning line
Clean a wide variety of surfaces quickly and in a predictable way. With the semi-automatic cleaning system you have less effort but more time and money!
Our product solutions
-
AQUABLAST® surface cleaners are carrier devices with spray bars, which can clean, demark, decoat, etc. surfaces with high pressure water.
-
The handheld floor cleaners are available as mechanical or electrical version and impress with great ergonomics and high-performance cleaning on different surfaces.
-
Clean a wide variety of surfaces quickly and in a predictable way. With the semi-automatic cleaning system you have less effort but more time and money!
-
Cleaning large surfaces quickly and easily - this is what distinguishes the AQUABLAST® Drive. The driver-controlled cabin vehicle is versatile and effective.
AQUABLAST® Drive
-
The AQUABLAST® Frame is a device for cleaning various construction and formwork elements.
-
The AQUABLAST® Line is a device for carrier systems and is suitable for cleaning and decoating vertical or vertically inclined surfaces.
-
AQUABLAST® Plus are carrier devices with spray bars, which clean surfaces with high pressure water and suck off removed substances simultaneously.
-
AQUAMAT tank cleaning units (TCUs) remove dirt and deposits from the inner and outer walls of tanks and vessels of various diameters.
-
AQUAREX® are individually manufactured tank cleaning devices for the internal cleaning of tanks and vessels - specially adapted to the conditions on site.
-
Clean heat exchangers safely and effectively - this is what our safety device is for. It is used with hand-held flexible and rigid high-pressure lances.
-
Configure your high pressure spray gun for your daily challenges. Available in mechanical, electrical and bypass versions and a variaty of accessories.
-
JETBOYS are ergonomic working tools in various configurations for fatigue-free water jetting - adjustable for a wide range of working positions.
-
The JETMASTER is a highly flexible and universally applicable high-pressure robot. For cleaning, roughening and removing a wide variety of substrates.
-
JETMATES are ergonomic, free-hanging working tools that can clean in all directions. Safe and less physical stress on the body thanks to recoil-free operation.
-
Our proven MASTERJET rotor jet and other manual versions are versatile and can be combined with many water tools - lightweight, compact, effective.
-
Work safety and quality in the cleaning of flanges becomes a simple and quickly task with our flange cleaner. It can be easily adapted to every cleaning task.
-
Save costs and valuable resources with our mobile containers for water treatment and sludge dewatering in a compact overall system on site.
-
The PIPEMASTER rotating device for high pressure hoses is manually operated and can be used to remove dirt and deposits in pipes and lines.
-
Specially developed pull and push nozzles are ideal for cleaning fully blocked pipes and lines of various diameters. Maximum cleaning and cutting efficiency.
-
Specially developed, low-wear rotor jets are ideal for cleaning half-clogged pipes and lines of various diameters. Available in different models and variations.
Rotor jets for pipe cleaning
-
Thanks to their fast rotating nozzle body, TURBOJET turbo nozzles are suitable for cleaning (half) blocked pipes and lines - for a wide range of diameters.
Hammelmann app
Keep up to date
© Hammelmann GmbH 2024, all rights reserved
