Pull and push nozzles
For cleaning completely blocked pipes
For all pipe diameters / with and without lance
Cleaning of completely blocked pipes in the axial direction.
Push nozzles remove material from in front of the nozzle. On flexible lances, these are only used in conjunction with pull nozzles.
90° bores result in maximum cleaning and cutting efficiency on the pipe wall.
Pull nozzles remove any material behind the nozzle. They pull the nozzle into the pipe using recoil force.
Pull and push nozzle models
Min. inner pipe diameter
0.47 inch Ø [12 mm Ø]
Operating pressure on internal thread
Max. 17k psi [1200 bar]
M8
Operating pressure on external thread
Max. 36k psi [2500 bar]
M6 x 0.75
Min. inner pipe diameter
0.66 inch Ø [17 mm Ø]
Operating pressure on internal thread
Max. 14k psi [1000 bar]
M10 x 1
Operating pressure on external thread
Max. 43k psi [3000 bar]
M10 LH
Min. inner pipe diameter
0.78 inch Ø [20 mm Ø]
Operating pressure on internal thread
Max. 24k psi [1640 bar]
M14 x 1.5 LH
Operating pressure on external thread
Max. 36k psi [2500 bar]
M14 x 1.5 LH
Min. inner pipe diameter
1.02 inch Ø [26 mm Ø]
Operating pressure on internal thread
Max. 43k psi [3000 bar]
M14 x 1.5 LH
Operating pressure on external thread
Max. 43k psi [3000 bar]
M14 x 1.5 LH
Min. inner pipe diameter
1.3 inch Ø [33 mm Ø]
Operating pressure on internal thread
Max. 7k psi [500 bar]
M22 x 1.5 DKO-S
Operating pressure on external thread
-
Min. inner pipe diameter
1.56 inch Ø [40 mm Ø]
Operating pressure on internal thread
Max. 26k psi [1800 bar]
M22 x 1.5 DKO-S
Operating pressure on external thread
-
Min. inner pipe diameter
2.2 inch Ø [55 mm Ø]
Operating pressure on internal thread
Max. 20k psi [1400 bar]
M36 x 2 DKO-S
Operating pressure on external thread
-
Hammelmann app
Keep up to date
© Hammelmann Corporation 2024, all rights reserved
